Ceramic Grains

Ceramic Grains

search for name
  • Abrasive materials
  • Matrix

The alumina abrasive having a microcrystalline structure obtained by the gel method is called ceramic abrasive grain. Through special processing, each grain has thousands of tiny crystals. This structure brings very good self-sharpness performance of the grains, which can continuously reveal new and sharp cutting edges.


RIKEN RMC wood grain ceramic is very dense, rough, strong and sharp. When worn, the ceramic abrasive grain will produce a sharp cutting edge similar to the knife edge. Therefore, the ceramic abrasive grain will have a lower cutting temperature and lower burnt than the ordinary alumina when sanding hard to sand materials.  It can be keeping sharpness for a long time with low loading. So that will bring you less total downtime and longer life.

Ceramic Abrasive Grain Product

Brief Introduction of Ceramic Abrasive Grain

Wood grain ceramic products could process into kinds of shapes, like belts, sand discs, sheets. The grains character decide that products have longer sanding life, higher cutting force and higher sanding efficiency performance.


Ceramic abrasive belts and sanding discs could bring you rapid cutting on difficult-to-sand materials such as aerospace, aerospace alloys and forged steel. The unique ability of ceramic abrasives increase production and reduces labor costs. RIKEN RMC wood grain ceramic products also have a good performance in general sanding in auto repair, steamships, and aluminum alloys.


The ceramic abrasive grain is a new abrasive with a microcrystalline structure prepared by gel sintering. It does not use the smelting method and uses Al2O3 below 5 microns. In the presence of an acid, some of the oxides is added to produce gelatin, which is made into granules. The raw material is strict, and the content of sodium oxide is less than 5%. It is characterized by non-smelting and crystallization within 3 microns.


Ceramic abrasives are hard and tough. Fine crystal shape can make Abrasives fall off regularly at different levels, make self-sharpening orderly, keep the sharpness of the whole abrasive, and have good processing effect.

Working conditions are equally important. Temperature and pressure are more important. Crystals are destroyed one by one to achieve self-sharpening.


It is first used to coat abrasives, which is 3-5 times higher than ordinary corundum (ordinary 100, zirconium corundum 207, ceramic abrasive 333).

At present, the world-famous ceramic abrasive grain manufacturer include Saint-Gobain, 3M, Tebuck , VSM and Hermes. American 3M company is called "Cubitron", and its maximum crystallization is less than 3 micron.

Norton company is called SG abrasive, its crystal form is several microns; German Hermes company is called CB abrasive, its maximum crystallization is less than 5 microns. The crystal type of CX abrasive in Japan is called 1 micron, but in fact, it is less than 3 micron.


财神捕鱼外挂 海南飞鱼游戏走势图 重庆农场快乐10分 2019世界飞镖锦标赛 现货黄金为什么买跌也能赚钱 陕西快乐十分前三遗漏 荒野之息 赚钱小游戏 时时彩什么叫组选24 河北11选5彩票控 北京时时彩助赢软件 福彩双色球综合走势图表图 彩票大本营号百彩票 1zplay电竞比分网app 190gg足球指数手机版 亿客隆时时彩票 广东11选5网站 双色球拖胆投注怎么玩